Saturday, December 31, 2011

Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit


==================================================================

Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

We'd wager there have been plenty of times you tried to maneuver a drill/driver into a spot that just wouldn't allow it and wished you had a small, powerful tool that would drive a screw where others just can't go. Here it is. The PS10-2A is one of the handiest, most powerful little drivers we've laid hands on. It's impressively powered by "litheon," which Bosch calls "the industry's most advanced lithium-ion battery technology." We can attest that there's absolutely no lag in power, and the run time is great; more than 100 drives per charge. Recharge time is just 30 minutes, so you should never have to wait for a battery. The best feature, of course, is the clever design. Instead of a pistol grip like most drivers, this one has a sturdy tool body and an articulating head that has five detents, letting you set it however you need it. The head itself is just 3-1/2-inches long, so it's no struggle at all to slip it into tight spaces suchas in between studs, under-sink cabinets, between joists and other tricky situations. If it's length you need, just flip the head to the vertical position and it's literally like having a screwdriver at your fingertips; it's not quite a-foot long at its full length. It uses 1/4-inch hex bits, and they're easy to change. We would have liked to see some on-board bit storage, but that's a small point. The two-finger trigger is comfortable, and it's quite sensitive, so take care not to strip your fasteners while you're on the learning curve. In all, we're really pleased with this little driver, and we think there's a place for it in just about every toolbox. Includes: tool, (1) carrying case, (2) 12-volt batteries, (1) 30-minute charger, (2) 1.5-inch drive bits. ...Read more


Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

We'd wager there have been plenty of times you tried to maneuver a drill/driver into a spot that just wouldn't allow it and wished you had a small, powerful tool that would drive a screw where others just can't go. Here it is. The PS10-2A is one of the handiest, most powerful little drivers we've laid hands on. It's impressively powered by "litheon," which Bosch calls "the industry's most advanced lithium-ion battery technology." We can attest that there's absolutely no lag in power, and the run time is great; more than 100 drives per charge. Recharge time is just 30 minutes, so you should never have to wait for a battery. The best feature, of course, is the clever design. Instead of a pistol grip like most drivers, this one has a sturdy tool body and an articulating head that has five detents, letting you set it however you need it. The head itself is just 3-1/2-inches long, so it's no struggle at all to slip it into tight spaces suchas in between studs, under-sink cabinets, between joists and other tricky situations. If it's length you need, just flip the head to the vertical position and it's literally like having a screwdriver at your fingertips; it's not quite a-foot long at its full length. It uses 1/4-inch hex bits, and they're easy to change. We would have liked to see some on-board bit storage, but that's a small point. The two-finger trigger is comfortable, and it's quite sensitive, so take care not to strip your fasteners while you're on the learning curve. In all, we're really pleased with this little driver, and we think there's a place for it in just about every toolbox. Includes: tool, (1) carrying case, (2) 12-volt batteries, (1) 30-minute charger, (2) 1.5-inch drive bits. ...Read more


Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

With its ultra-compact design, the Bosch PS10-2A 12-Volt Max Lithium-Ion Impact Driver Kit is a valuable complement to your high-voltage tools. Offering big power, a small package, long-lasting, efficient performance, optimum comfort, and reliable control, this driver kit comes with a storage bag and two rechargeable Litheon batteries.

The PS10-2A 12-Volt Max Lithium-Ion Impact Driver Kit offers:
  • Litheon batteries for long-lasting performance.
  • Articulating head locks in 5 positions.
  • Electronic clutch for versatility.
  • Ergonomic design to minimize user fatigue.


The first professional tool to rotate 90 degrees. View larger.

Compact body and rotating head let you access hard-to-reach areas.
12-Volt Litheon Batteries for Long-Lasting Power
The PS20-2A gets its power from Litheon batteries, the most advanced lithium-ion batteries available today. These batteries allow more battery charges and provide longer runtime with no memory effect--meaning the batteries don't need to be empty before charging. The batteries can also be taken out of the charger before charging is complete.

Other benefits include: significantly less self discharge; electronic cell protection that guards against overheating, overload, and deep discharge; and no loss of power from the first to last screw or hole. Best of all, these batteries will fully charge in 30 minutes and will be at 85% capacity in just 15 minutes.

Compact and Powerful for Most Drilling/Driving Applications
Small and powerful enough to go where power tools could never go before, the PS10-2A handles 80% of all drilling and driving applications and easily fits in a belt pouch. The driver uses 1/4-inch hex bits that change easily thanks to the quick-change chuck, and it features a comfortable and responsive two-finger trigger.

Compact, Articulating Head for Easy Access of Hard-to-Read Areas
With its compact head that measures 3.5 inches and extended length of just under one foot, the PS10-2A is three times shorter than the leading competitor and is the first pro tool to rotate 90 degrees. Without the cumbersome pistol grip of most comparable drivers, the PS10-2A features a sturdy tool body and an articulating head that rotates and locks in five different positions. And because the head is so compact, you can slide this tool into hard-to-reach areas or tight corners, like between studs, under the sink, and between joints.

Electronic Clutch and Responsive Trigger for Precision
The PS10-2A provides 80 in./lbs. of torque, which allows you to drive approximately 100 three-inch screws per battery charge. Additionally, its 7+1 electronic clutch ensures precision driving by letting you match the correct speed to the task at hand. The driver's trigger boasts a revolutionary design that provides increased sensitivity and control and eliminates over-torque in soft base materials. An added bonus, the design makes it easy to switch to the drill mode for making pilot and other small bore holes.

Smart Features for Easy Use
To help minimize work fatigue, even as you position the drill over your head or at awkward angles, the PS10-2A's cushion-grip handle ensures comfort in the grip zone. For added convenience, an integrated hanger hook allows for easy tool storage and accessibility.

ProVantage Guarantee
The PS10-2A comes with the ProVantage three-year protection plan, which guarantees two years of battery protection and one year of tool protection. Under this plan, you can receive two years of free battery replacements, tool replacement for one year, and a free tool repair package for the second and third years.

What's in the BoxPS10-2A; one carrying case; two 12-volt batteries; one 30-minute charger; and two 1.5-inch drive bits.


12V Max Lithium Ion Family of Tools
For more information, click on the images below
PS10-2A
Impact Drive Kit

PS20-2A
Pocket Driver with Two Batteries

PS50-2A
Multi-X Cutting Kit

PS50-2B
Multi-X Carpenter Kit

PS30-2A
3/8-Inch Drill/Driver

PS40-2A
Impact Driver

CLPK21-120
Impact Driver and Pocket Driver Combo Kit

PS70-2A
Metal Shear



...Read more


==================================================================
Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit


Model Of Item : PS10-2A


Average Customer Review:


List Price :
$282.00

Our Price :
$134.99

You Save :
52%


Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit

Friday, December 30, 2011

Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight


==================================================================

Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

The new Micro Driver Drill from Hitachi is the first in a series of 10.8 volt Lithium Ion tools. The DB10DL is impressively lightweight and compact at less than 6" in length and weighing only 1.8 lbs. Fitting easily in any tool belt, it is the ideal drill for trades such as installation, electrical, HVAC or for mor eprecise applications like finish cabinetry. Its compact size is especially useful when working in tight spaces that are hard to reach with conventional drills. Hitachi's DB10DL Micro-Drill is free standing for convenience: simply set the tool down on its battery and it stands on its own. Its balanced handle (5 1/2" in circumference) ergonomically supports the hand for a comfortable and secure grip. This tool comes with two 1.5 Amp/Hr. Li-Ion batteries that deliver consistent power for the duration of the charge unlike traditional Ni-Cad batteries that fade as soon as the trigger is pulled. Li-Ion batteries have an overall life that is 3x longer than traditional Ni-Cad batteries. ...Read more


Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

The new Micro Driver Drill from Hitachi is the first in a series of 10.8 volt Lithium Ion tools. The DB10DL is impressively lightweight and compact at less than 6" in length and weighing only 1.8 lbs. Fitting easily in any tool belt, it is the ideal drill for trades such as installation, electrical, HVAC or for mor eprecise applications like finish cabinetry. Its compact size is especially useful when working in tight spaces that are hard to reach with conventional drills. Hitachi's DB10DL Micro-Drill is free standing for convenience: simply set the tool down on its battery and it stands on its own. Its balanced handle (5 1/2" in circumference) ergonomically supports the hand for a comfortable and secure grip. This tool comes with two 1.5 Amp/Hr. Li-Ion batteries that deliver consistent power for the duration of the charge unlike traditional Ni-Cad batteries that fade as soon as the trigger is pulled. Li-Ion batteries have an overall life that is 3x longer than traditional Ni-Cad batteries. ...Read more



==================================================================
Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight


Model Of Item : KC10DAL


Average Customer Review:


List Price :
$405.82

Our Price :
$159.99

You Save :
61%


Hitachi KC10DAL 10.8 Volt Li Ion 3-Tool Combo Kit Includes Drill/Driver, Impact Driver and Flashlight

Thursday, December 29, 2011

Makita 763198-1 Keyless Chuck

Makita 763198-1 Keyless Chuck

Makita 763198-1 Keyless Chuck

Makita 763198-1 Keyless Chuck


==================================================================

Makita 763198-1 Keyless Chuck

Includes 3/8-in Keyless Chuck with 1/4-in Hex Shank Adapter - 763198-1 ...Read more


Makita 763198-1 Keyless Chuck

Includes 3/8-in Keyless Chuck with 1/4-in Hex Shank Adapter - 763198-1 ...Read more



==================================================================
Makita 763198-1 Keyless Chuck

Makita 763198-1 Keyless Chuck


Model Of Item : 763198-1


Average Customer Review:


List Price :
$48.00

Our Price :
$31.95

You Save :
33%


Makita 763198-1 Keyless Chuck

Wednesday, December 28, 2011

Milwaukee 9072-20 1/2-Inch Impact Wrench

Milwaukee 9072-20 1/2-Inch Impact Wrench

Milwaukee 9072-20 1/2-Inch Impact Wrench

Milwaukee 9072-20 1/2-Inch Impact Wrench


==================================================================

Milwaukee 9072-20 1/2-Inch Impact Wrench

This model features a Quik-Lok cord, pin-detent system to securely retain sockets or adapters, and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. This tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time. U.S.A. Cordless: No, Max. Torque (ft.-lbs.): 300, Impacts Per Minute (IPM): 1,000-2,600, Drive (in.): 1/2, Speed - No Load (RPM): 1,800, Reversible: Yes, Amps: 7, Volts: 120, Battery Included: No, Charger Included: No, Tool Length (in.): 11 5/8, Tool Weight (lbs.): 6.0 ...Read more


Milwaukee 9072-20 1/2-Inch Impact Wrench

This model features a Quik-Lok cord, pin-detent system to securely retain sockets or adapters, and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. This tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time. U.S.A. Cordless: No, Max. Torque (ft.-lbs.): 300, Impacts Per Minute (IPM): 1,000-2,600, Drive (in.): 1/2, Speed - No Load (RPM): 1,800, Reversible: Yes, Amps: 7, Volts: 120, Battery Included: No, Charger Included: No, Tool Length (in.): 11 5/8, Tool Weight (lbs.): 6.0 ...Read more



==================================================================
Milwaukee 9072-20 1/2-Inch Impact Wrench

Milwaukee 9072-20 1/2-Inch Impact Wrench


Model Of Item : 9072-20


Average Customer Review:


List Price :
$360.00

Our Price :
$177.41

You Save :
51%


Milwaukee 9072-20 1/2-Inch Impact Wrench

Monday, December 26, 2011

Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit


==================================================================

Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

The Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill delivers power, performance, and improved ergonomics in a compact size. The LXFD01CW weighs only 3.3 pounds, and the 18-Volt Compact Lithium-Ion battery reaches a full charge in only 15 minutes on Makita's ENERGY STAR qualified Rapid Optimum Battery Charger for more work and less downtime.

Key Action Shot

View larger
Feature 1Feature 2
Feature 3Feature 4
LXFD01CW Features
POWER - Makita-built 4-pole motor delivers 480 inch-pounds of Max Torque

COMFORT - Only 3.3 pounds with comfortable ergonomic grip and built-in LED light

SPEED - 2-speed all-metal transmission

PERFORMANCE - 18-Volt Compact Lithium-Ion batteries charge in 15 minutes, run longer, and deliver 2.5X more cycles

INCLUDES - (2) 18-Volt Compact Lithium-Ion batteries, rapid charger, and case

Tool Specifications
Tool Spec
CapacitiesSteel (1/2"), Wood (1-1/2")
No Load Speed0-400, 0-1,500 rpm
Max Torque480 in.lbs.
PTI Torque290 in.lbs.
Battery18V Compact Lithium-Ion
Overall Length7-9/16"
Net Weight3.3 lbs. (w/battery)
Makita-Built Motor Engineered for Versatile Power
The LXFD01CW features a Makita-built four-pole motor that delivers 480 inch-pounds of max torque and 290 inch-pounds PTI Torque, with an all-metal two-speed transmission (0-400/0-1,500 rpm) to cover a wide range of drilling and driving applications. At only 7-9/16 inches long and 3.3 pounds, the LXFD01CW has a compact and ergonomic design for reduced operator fatigue and a new rubberized soft grip for increased comfort on the job. The built-in LED light illuminates the job area for applications in low-light conditions and close quarters.

Versatile Design for a Range of Applications
The LXFD01CW is engineered for a range of drilling and driving applications and is ideal for HVAC, electrical, plumbing, remodeling, and woodworking. The combination of power and performance in a compact size makes the LXFD01CW ideal for any professional contractor who requires a best-in-class engineered compact cordless driver-drill. The LXFD01CW is another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's 18-Volt Compact Lithium-Ion Cordless Tool Series
Compact Lithium-IonAs one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18-Volt LXT lithium-in cordless series. Five years after its debut, Makita's LXT series has grown from 7 to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18-volt compact lithium-ion for cordless power in a more compact size.

Makita's 18-volt lithium-ion batteries and ENERGY STAR rated Optimum Charging system provide several benefits over old battery technology. When compared to traditional 18-volt NiCad batteries, Makita's 18-volt lithium-ion batteries have 40 percent less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time. Makita's 18-volt lithium-ion battery delivers 2,000 cycles--two-and-a-half times more than a NiCad battery. In addition, built-in shock-absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power.

During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also fast: it will charge an 18-volt LXT lithium-ion battery in just 30 minutes and an 18-volt compact lithium-ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18-volt LXT and 18-volt compact lithium-ion batteries that plugs into 12-volt DC sockets equipped in most automobiles and trucks for added mobility.

Makita LogoAbout Makita
Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. Makita is Best in Class Engineering.

Warranty
Every Makita lithium-ion tool is backed by Makita's 3-year warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita lithium-ion batteries and chargers have a limited 1-year warranty.

What's in the Box
Makita LXFD01CW 18-volt compact lithium-ion cordless 1/2-inch driver-drill, two 18-volt compact lithium-ion batteries, 15-minute rapid optimum charger, tool belt clip, double-ended bit (Phillips and slotted), and tool case.


...Read more


Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

The Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill delivers power, performance, and improved ergonomics in a compact size. The LXFD01CW weighs only 3.3 pounds, and the 18-Volt Compact Lithium-Ion battery reaches a full charge in only 15 minutes on Makita's ENERGY STAR qualified Rapid Optimum Battery Charger for more work and less downtime.

Key Action Shot

View larger
Feature 1Feature 2
Feature 3Feature 4
LXFD01CW Features
POWER - Makita-built 4-pole motor delivers 480 inch-pounds of Max Torque

COMFORT - Only 3.3 pounds with comfortable ergonomic grip and built-in LED light

SPEED - 2-speed all-metal transmission

PERFORMANCE - 18-Volt Compact Lithium-Ion batteries charge in 15 minutes, run longer, and deliver 2.5X more cycles

INCLUDES - (2) 18-Volt Compact Lithium-Ion batteries, rapid charger, and case

Tool Specifications
Tool Spec
CapacitiesSteel (1/2"), Wood (1-1/2")
No Load Speed0-400, 0-1,500 rpm
Max Torque480 in.lbs.
PTI Torque290 in.lbs.
Battery18V Compact Lithium-Ion
Overall Length7-9/16"
Net Weight3.3 lbs. (w/battery)
Makita-Built Motor Engineered for Versatile Power
The LXFD01CW features a Makita-built four-pole motor that delivers 480 inch-pounds of max torque and 290 inch-pounds PTI Torque, with an all-metal two-speed transmission (0-400/0-1,500 rpm) to cover a wide range of drilling and driving applications. At only 7-9/16 inches long and 3.3 pounds, the LXFD01CW has a compact and ergonomic design for reduced operator fatigue and a new rubberized soft grip for increased comfort on the job. The built-in LED light illuminates the job area for applications in low-light conditions and close quarters.

Versatile Design for a Range of Applications
The LXFD01CW is engineered for a range of drilling and driving applications and is ideal for HVAC, electrical, plumbing, remodeling, and woodworking. The combination of power and performance in a compact size makes the LXFD01CW ideal for any professional contractor who requires a best-in-class engineered compact cordless driver-drill. The LXFD01CW is another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's 18-Volt Compact Lithium-Ion Cordless Tool Series
Compact Lithium-IonAs one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18-Volt LXT lithium-in cordless series. Five years after its debut, Makita's LXT series has grown from 7 to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18-volt compact lithium-ion for cordless power in a more compact size.

Makita's 18-volt lithium-ion batteries and ENERGY STAR rated Optimum Charging system provide several benefits over old battery technology. When compared to traditional 18-volt NiCad batteries, Makita's 18-volt lithium-ion batteries have 40 percent less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time. Makita's 18-volt lithium-ion battery delivers 2,000 cycles--two-and-a-half times more than a NiCad battery. In addition, built-in shock-absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power.

During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also fast: it will charge an 18-volt LXT lithium-ion battery in just 30 minutes and an 18-volt compact lithium-ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18-volt LXT and 18-volt compact lithium-ion batteries that plugs into 12-volt DC sockets equipped in most automobiles and trucks for added mobility.

Makita LogoAbout Makita
Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. Makita is Best in Class Engineering.

Warranty
Every Makita lithium-ion tool is backed by Makita's 3-year warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita lithium-ion batteries and chargers have a limited 1-year warranty.

What's in the Box
Makita LXFD01CW 18-volt compact lithium-ion cordless 1/2-inch driver-drill, two 18-volt compact lithium-ion batteries, 15-minute rapid optimum charger, tool belt clip, double-ended bit (Phillips and slotted), and tool case.


...Read more



==================================================================
Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit


Model Of Item : LXFD01CW


Average Customer Review:


List Price :
$378.00

Our Price :
$165.00

You Save :
56%


Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit